Instead, it’s suggested to cut tangled hair and fibres with scissors, which is a less effective system than you’ll find elsewhere..
It’s still a good idea to wipe down the compartment holding the bag though..Never use a bagged vacuum without a bag, unless the manual says this is fine.
The bag acts as the primary filter in a bagged vacuum.Without it, the pre-motor filter will become clogged much faster, and the motor may be more exposed to dirt..Step 5: Clean the Vacuum’s Interior and Remove Clogs.
This step can be performed throughout the cleaning process, but it’s easiest when the dust canister is removed and drying..Whenever you notice any clumps of dirt or dust inside the vacuum, use a brush or cloth to wipe it.
If you can’t easily access the area, use a can of compressed air to blow it..
In most cases, small patches of dust and dirt won’t have a big impact on your vacuum’s performance.You can also fully remove the dust cup for cleaning.
You won’t need to do this every time you empty the vacuum, but it’s a good idea to clean the cup whenever there is visible dirt or dust..Turn off the power, empty the vacuum, and leave the bin hinged downwards.. Slide forward the filter housing to remove it.. Press the orange release tab on the bin and simultaneously pull the cup away from the vacuum.. Handwash the vacuum bin with lukewarm water (do not use any detergents or cleaning products)..
Allow the bin to dry fully before reinserting it into the vacuum..Replace the bin by sliding it into the bottom of the nozzle.